Battery DC battery lifter is used for equipment operation without external power supply, and lifting operation can be realized. Therefore, the cargo elevator battery is the source of power. The operation time of battery maintenance elevator can be prolonged. During charging and discharging without battery, the battery cannot be charged or encountered during discharging, because DC power supply will cause the risk of short circuit or even explosion, so it is easy to, What you see is negative. Don't take it
Check the work regularly. If a battery is broken, the pad softens and the active material of the plate falls off. At this time, the professional battery should be checked, repaired or cooperated in time
Power transmission and storage are strictly prohibited. The state of high voltage refers to the timely charging of the battery after use. Sulfate and lead sulfate crystals are easy to adhere to the board and block the electric ion channel, resulting in insufficient charging and reduced battery capacity. The greater the battery loss, the more serious the battery damage. When the battery is idle, it should be charged once a month to prolong the service life of the battery
The average charging time is about 8 hours. If there is a shallow discharge (very short mileage), the battery will be quickly filled and charged, which will cause the battery to lose water and heat and reduce the battery life
Do a good job in the safety protection of the freight elevator battery to prevent the sun from being exposed to high temperature. The high temperature environment will increase the internal pressure of the battery and automatically open the battery pressure limiting valve. The direct consequence is to increase the water loss of the battery. Excessive water loss of the battery will inevitably lead to the decline of battery activity, the softening of the acceleration plate, charging heating, drum, shell deformation and other fatal injuries
This article is divided into
1
page
